Product Description
The Drawing Gum marker lens for easier use of the product, with a more precise application, and thinner lines. It must be primed before initial use, then: - with the top on, shake the marker firmly to get the ball moving, - then, on a sheet of paper, press on the tip several times to soak it with paint. It is advisable to clean the tip regularly after use by taking it out of its base and passing it under warm water. If residue forms on the tip, it is easy to remove excess material with your finger. If necessary, a spare tip is integrated directly in the cap. It must be stored horizontally, and can be kept for 12 months after it is first primed at moderate room temperature (15-25 °C). The marker is an all-in-one tool. This single solution replaces the drawing gum bottle, the paint brush and the water container. This tool is very practical due to its easy handling and its use, which only requires you to choose a surface. It is a mobile product that can be taken everywhere.
High-precision marker to keep areas colour-free on works using watercolour, ink or diluted gouache. For fine, distinct continuous applications: drawings, finishings, writings, effects etc. The unbreakable 0.7mm plastic tip withstands repeated opening. Its does not splay and allows for precise drawing
Applications :
The Drawing Gum is a peelable drawing gum for the realization of works in reserve with ink, watercolor, gouache... It is applied with a brush or a pen on the parts of the drawing which are to be masked.
The coloring is done when the Drawing Gum is dry.
To discover the parts which were masked, it is enough to peel off the Drawing Gum with the finger or with an eraser, once the colors are perfectly dry.
The Drawing Gum markers allow an easier use of the product, and a more precise application with more or less fine lines depending on the wick used: 0.7 mm or 4 mm round.
They must be primed before the first use:
- shake the marker firmly, cap closed, to circulate the ball,
- Then, on a sheet of paper, press the tip several times to soak the paper with paint.
If residue forms on the wick, it is easy to remove the excess material with your fingers. It is advisable to clean the 0.7 mm plastic wick regularly after use by taking it out of its base and running it under warm water.
If necessary, a spare wick is integrated directly into the cap.
They should be stored horizontally with the cap closed, and can be kept for 6 months after the first priming at moderate room temperature (15-25°C).
The marker is a very practical all-in-one tool due to its easy handling and use. It is a nomadic product that can be taken everywhere. It can be used in addition to the bottle version which is more adapted to large applications.
Caution: air travel can cause excess product on the wick and in the cap. Carefully open the cap and if necessary, clean the wick and cap before starting to decorate.
